Information, Questions, Discussion about Throwing Mechanics and Technique
Moderators: Timko, Solty, Frank Delicious, Blake_T, Fritz, Booter
When driving how firm should my power grip be? I know that too loose is bad, what about too tight? How much pressure should the thumb have? I heard that it is better to apply more pressure towards the tip of the thumb.
- Posts: 19
- Joined: Fri Aug 31, 2012 11:44 pm
- Location: Eau Claire, Wisconsin
- Favorite Disc: Blizzard Ape
Have you seen this video? Feldberg talks about using your thumb at about 10:50
Looks like I can only link to the mobile version. Disc golf monthly episode 94.
Anode | Comet | Axis |Vector | PPD | SPD | CPD
- Fairway Surgeon
- Posts: 529
- Joined: Mon Oct 13, 2008 6:17 am
- Location: Southern Wisconsin, where the best courses are in Illinois!
- Favorite Disc: Axis
I suspect some of my findings because i'm injured and often times my subconscious opens my fingers even in putts despite conscious commands to grip tightly once the elbow starts straightening. I start out loose so that i can get a good acceleration of the arm and try to pinch with all my might late in the throw between the index finger and the thumb in drives. In the beginning it is good to have most of the grip power in the rear of the disc between the base of the thumb and the opposite side of the hand. Mids and putters require less index finger pinch. In driving the thumb pressure has a lot to do with the distance because to achieve a full disc pivot and a late enough rip in the full hit stage the thumb has to pinch hard because once the disc is off of the fingers you can't add power to the disc and in order to hold on to the disc long enough a lot of power is needed on both sides of the disc and the thumb is alone vs 4 fingers. So the thumb determines the grip strength and much of the distance and spin=flight path. Between 45 and 80 degree angle of the thumb to the flight plate helps in pushing down harder on the flight plate (leverage). It is way easier to push the thumb into the flight plate this way so there's more pressure and some of the plastic touches the sides of the tip of the thumb for more friction reducing slipping.
Beat DX looks bad but with good molds for your power and form it more than rewards you with better flight than a new disc. In fact there are people who loan their discs to new players to hack against everything on the course to let the disc break in faster so that when they take the disc back it i too flippy for the newer players and perfect for the wiley ole buggers armed with yet another money disc.
Flat shots need running on the center line of the tee and planting each step on the center line. Anhyzer needs running from rear right to front left with the plant step hitting the ground to the left of the line you're running on. Hyzer is the mirror of that.
- Scandinavian Video Mafia
- Posts: 10547
- Joined: Sun Mar 18, 2007 6:07 am
- Location: Finland, sea level
- Favorite Disc: About to ace
Return to Technique
Who is online
Users browsing this forum: No registered users and 4 guests