I think that you misunderstood my question. I was just curious as to which colors were mixed together to get your fleshtone. It is a good color, and I would like to use it on a few dyes. =)JohnnyB wrote:Just a quick idea of what I did.
In between each redip I rinsed off the disc and patted it dry.
I did my first cut to cover the dark outlines and the red tones of the picture, since that was where the most variety was at.
I wanted a brown outline so I started with purple, once it was mixed with the red and pink it turned brown.I dyed the outline till it was almost dark enough peeled part of the hair and did a quick dip in that.
Switched to my red dye peeled my apple and started dyeing that till it started to show some darkness, peeled the rest of the hair let that get about medium darkness. Peeled the flesh and and dipped it just long enough for it not to be white. Switched over to pink and gave it a slightly longer bath in that checking often till it was where I wanted it.
Then I stripped it cleaned the disc(keep in mind to let the dye sit for a bit so you don't smear anything) and recovered it in vinyl. Here's the point you have to be VERY careful if you want to use this method. I put the covered disc over my lightbox and carefully cut the green areas. Then I did three dips in green(leaves, snake, eyes) and stripped the disc cleaned and covered it again. Same method for the blue and I even left the back uncovered and did a full dip to give the disc a solid look. Make sure that you check for any bleed point along the edge of the disc onto the done art, it would suck monkey balls to get a bleed at that point.
Users browsing this forum: Exabot [Bot] and 3 guests