Golf Discs, Bags, Baskets, Videos, and other Disc Golf Related Equipment
Moderators: Timko, Solty, Frank Delicious, Blake_T, Fritz, Booter
Thatdirtykid wrote:The only problems I have come across is:
they beat alittle faster than wizards
they dont keep that grippy feel too long, they get alittle smooth with dust and wear.
They bounce out a bit.
the vairation in softness varies by temperature more than most putters ive tried. They get pretty soft in left in the sun long, and pretty stiff in the cold. (especially in black, which is all ive found in the weights I like)
Sounds like the cons of any pro-d/DX putter, I'll keep it in mind though
adidadg wrote:Sounds like the cons of any pro-d/DX putter, I'll keep it in mind though
I agree. However, the gateway equivalent to pro d/dx, which I believe to be s, seems to outlast them. I will admit that my wizard has taken some hefty damage, but considering that I use it on every hole (as a putter) and sometimes drive with it, it has held up well.
- 1000 Rated Poster
- Posts: 1291
- Joined: Tue Dec 06, 2005 12:45 pm
- Location: south Texas
I have heard good things about gateway "S", but has anybody found it to warp? of the 3 I saw in the store, all of them were warped a little, just little bubbles and dents on the top of the disc, and they were unused. I also have a Proto S wizard from a couple years back, and it is warped beyond recognition and I had used it strictly for putting (and rarely at that). It pretty much looks more like a JuJu than a wizard at this point. I'm not trying to knock the putter or the company but it is something I have noticed. Maybe its our wacky climate up here
i have three of four wizards in the "s" plastic that have warped. They look like clovers- but hasnt affected the flight much, one is beyond clovered and is only thrown over water, in hopes that it might go in-which gives me an excuse to order another. all of my proto wizards have warped to some degree. - all in "s" plastic.
- Fairway Surgeon
- Posts: 637
- Joined: Fri Feb 03, 2006 6:08 pm
- Location: Austin, Tejas
- Favorite Disc: Beef Curtain
s is definatly the most durable base plastic (unless you include millinium plastic as a base even though its just innova pro)
I still perfer baseline plastic for putters. Even if it means I replace them slightly more often, and if they need a bit of work sometimes.
Z Pred-ESP Cyclone-Z Force-Z Aftershock-Z Comet-Ion-Pro Rhyno
- Disc Whore
- Posts: 3673
- Joined: Fri Dec 23, 2005 12:35 am
- Location: Longmont Co
- Favorite Disc: z pred
the dga base plastic has been super durable. i have had it 3 years now and it has almost no scatches and its dome is almost perfect.
dga hawkeye rules!!!!
***Always looking for 1.1 Sirius Orion LFs (SOLF)-will pay $$$ or trade***
Need Air/Water filters or HVAC service/supply?
ApprovedComfort.com - Servicing the Greater Chicagoland Area and more
AllKindsofFilters.com - Use code 'discgolf' to receive a special discount
- Tree Magnet
- Posts: 378
- Joined: Tue Oct 18, 2005 3:25 pm
- Location: Crystal Lake, IL
I got an Original Roc from Mike S. and it's now my main putter, similar plastic to the KC Aviar plastic (super stiff) and it's the mold the classic roc was based off of (Original Roc has a slightly larger bead though) i love this thing for putting, its a bit faster than a putter, but it's a sniper. In the past 3 rounds I've hit over 5 100' putts with it and anything within 50' is almost as good as in... I'm hoping this accuracy wont wear off...
- 1000 Rated Poster
- Posts: 1082
- Joined: Mon Dec 05, 2005 12:31 pm
- Location: Monterey Bay, California
I just bought a Black Proto E-Wizard at 180g off of ebay. Not exactly PDGA legal, but I couldn't pass up black evolution plastic and a 180 might be a perfect weight for me. I mean, what's a few grams?
"a man is a success if he gets up in the morning and he gets to bed at night, and in between he does what he wants to do."
-- bob dylan
- Fairway Surgeon
- Posts: 799
- Joined: Tue Jan 24, 2006 4:27 pm
- Location: new jersey
Return to Equipment
Who is online
Users browsing this forum: Bing [Bot] and 2 guests